Herlaadwinkel.nl voor een ieder die iets zoekt op het gebied van herladen en toebehoren.

» Main Menu » ● RELOADING, Tools and Equipment »
MAKE YOUR OWN - BULLETS and LEAD BALLS; Moulds, Melters »
BULLET SIZING »
BULLET LUBE & SIZING DIE » 90046

| My Account | My Shopping Cart | Proceed to Checkout |

Languages

Product Search

Manufacturers

Informatie

● QUESTIONS & ANSWERS

● SHIPPING & ORDERING

● CONDITIONS of USE

Overige Info

● WET WAPENS & MUNITIE

● PRIVACY NOTICE

● CONTACT US

Lee BULLET LUBE & SIZING KIT caliber .356
[90046]

44.50 Euro

Lee BULLET LUBE & SIZING KIT caliber .356

- Click Here - For a Larger Image

Description

Fastest and easiest way to lubricate and size cast bullets.
Standard 7-8 x 14" threads fit any single stage reloading press.

Bullets are pushed through the sizing die nose first, so no special nose punches are needed.
Gas checks are automatically seated and crimped in place.
Sized bullets are captured in the special container.

Intended for use on single stage presses only. The push through Punch is used in place of a Shell Holder in the Ram.

Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary.

To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox, push a gas check on the base of the bullet and set the bullet on the punch.
When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on.

Content

This set consists of the following parts complete for one size;

• Sizing Die.
• Container.

Attention

For cast bullets, select a sizing kit 0.001 inch larger than bore diameter of the barrel.

Bullets must be lubricated before sizing with Lee Liquid Alox.

The set is delivered without the pictured Lee Breech Lock Reloader Press (Lee product number 90045) and Liquid Alox (Lee product number 90177).
If needed these need to be ordered separately.